analog to pri

[curt2k]

hello,have a mics 0x32 w/6.1,dt1,pri and 7 analog lines.
customer wants all analog lines put on t1-pri.can i use a
asm to put other seven lines on stations or assign them as target lines.one line is a fax.
thanks in advance

 

[luv2ski]

not sure i understand but why not have your provider port the numbers over as recieved digits then assign DID's as the lines they once were

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[curt2k]

ok that's a great idea,but what about the fax line thats comming over on a channel bank.the customer wants all lines on the pri now.
thanks

 

[luv2ski]

same thing assign DID to ata and whala..presto changeo its a done deal

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.