Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANALOG STATION MODULE INSTALL GUIDE

Status
Not open for further replies.
txcomtel

txcomtel

Technical User
Sep 18, 2007
15
US
Looking for (asm)analog station module install guide.
 
Sort by date Sort by votes
Just connect one end of the fiber cable to the asm and the other to the expansion card on the main cabinet. Then terminate a 25pr amphenol on to bix/66
 
Upvote 0 Downvote
Make sure you connect the fiber from the main cabinet to the fiber port labeled 1. Fiber port 2 can then be daisy chained to fiber port 1 on a second ASM for a total of 16 extensions per fiber port on the main cabinet.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

atcom11
  • Locked
  • Question
Answer DN ringing on an Analog Cordless Phone
Replies
1
Views
80
curlycord
curlycord
Mountainbear
  • Locked
  • Question
Nortel still good to install? 6
Replies
3
Views
189
curlycord
curlycord
Jay Monty
  • Locked
  • Question
Reassigning analog port
Replies
2
Views
82
curlycord
curlycord
iPepsi57
  • Locked
  • Question
Power Supply from 0x16 Station module on 0x8 Analog Module - Failed PSU 2
Replies
6
Views
215
exsmogger
exsmogger
Tele-tech
  • Locked
  • Question
SIP to Analog Line convertor for MICS/CICS
Replies
3
Views
83
Qzwsa
Qzwsa

Part and Inventory Search

Sponsor

Back
Top