Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

analog phones going out of service

Status
Not open for further replies.
letman2

letman2

Technical User
Mar 15, 2007
211
US
After we upgraded to cm 6.3 a few of our analog phones are going out of service. We release them and they are ok for awhile. We have changed ports and tested the copper and see no problems. the boards are mm716.
 
Sort by date Sort by votes
Did you update your MM716 firmware? Firmware version (Vintage 103)
 
Upvote 0 Downvote
we are HW 12 ver 98. Does 103 fix the problem?
 
Upvote 0 Downvote
Not sure but its either firmware or you need to busyout/release board but you are on hardware version 12 so i'm not sure if the firmware is compatible.

From 103 release notes:
Changes from V102 to V103 -
^M
A. Fixed issue with LINE ports getting stuck with no dial-tone.

B. Fixed error in Busy/Release of a shorted DID trunk port. Board firmware
will not reactivate a shorted DID trunk port as it can damage the
hardware.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Locked
  • Question
G450 Analog-test command
Replies
0
Views
282
Red19
R
frontier4195
  • Locked
  • Question
Unrestrict Guest room phones 1
Replies
3
Views
370
SoftwareRT
SoftwareRT
dianvaguar
  • Locked
  • Question
Avaya Phones Are Getting Logged Out After Any Service Interruptions 1
Replies
4
Views
325
jimbojimbo
jimbojimbo
Stinney
  • Question
Deny New Service - Media Server
Replies
1
Views
249
Stinney
Stinney
Richard_Harrow
  • Locked
  • Question
How do I view licenses for IP phones and analog phones on CM 6.3?
Replies
3
Views
360
AvayaTier3
AvayaTier3

Part and Inventory Search

Sponsor

Back
Top