Analog phone rings at night

[salert]

I have an issue with a phone that rings after the attendant puts the system in night mode. A patients phone will ring with the main line.

I have checked the ring group and the phone is not in the night group.
Verified all the sets in the group did not have an answered DN of the local.
That there was no forwarding on the other phones to the concerned local.

Anything I'm missing?

 

[snowman50]

ok check the other Lines as default all Target lines are controled from the first extn port EG:221

Dont use Ring group 1
Use any other ring groupas ball lines are programmed to ring this group.

 

[norstarboy125]

It wouldnt be a answer dn as it only happens when the system is put into night mode, which means it has to be some kind of ring group/hunt group set up.

Charm City Communications

http://www.charmcitycommunications.com

 

[salert]

Yeah I made a rookie error didn't scroll far enough to the right to see the forward all, so when the system was put in night mode the extension the was forwarded to the patients room would ring.