analog phone on 012 card 1

[mpstech]

How do i program an merlin legend to use an single line analog phgone to use an specific line/trunk for incoming and outgoing calls.

Thanks in advance

Mike Mike

 

[TouchToneTommy]

Extensions - Lines/Trunks - Ext. No. - Enter

Now press the Line that you want to assign. If that line is part of a pool, it will assign ALL the lines in that pool.

Now back up and go to Centralized Telephone Programming.

Even though it is a Single Line telephone, it will program as if it is a multi-line telephone. You will find the line assigned to button 4 with immediate ring. (assuming no other lines/pools have been assigned) Press button 4 - List Feature - Auto Line Select - press button 4 again (the LED should show green) - ENTER

Now when you go off-hook, you should be grabbing the line/pool you assigned, and by default it will ring incoming when you assigned it to the extension.