Analog PBX extension to Digital Transfer Command

[ZeroAdmin]

Good Afternoon,

I have tested the following:
With an anolog phone connected to an Analog port on my PBX phone system, I am able to dial an external long distance number (9, 1, xxx xxx-xxxx), then when there is an answer, I am able to hookflash (hit the hangup or flash) hit the internal extension (6xxx) then hangup and the call is transferred to an internal digital extension.

My question is, is it possible to transfer the call prior to someone having to pick it up? The number being dialed is almost always different. Merling Magix Rel 1.5 v6.0. (016 TRR HWV 50 App Vintage21 Firmware vintage 12).. If anyone needs any more info for a suggestion, just ask!

Thanks in Advance,
ZeroAdmin

 

[franke]

To make a transfer without consultation,press and release the flash button, dial the extension number and hang up. The call is transfered.

franke