analog line issue?

[CharlesBr]

On a 3300 CXi II, running MCD 4.2, what would the foolowing log mean?


CLSMeasureLSTrunkSettings::GetLSPortDefaultCoefficients()
Description Default Coefficient for LS Trunk (0, 0) is not set.


it comes back for all the trunks many times a day, I could not see any mention of it in the tech handbook or the system help...

thanks!

 

[Supernova99]

The trunk is being measured there is a tool to perform an accurate measurement 'LS Measure Tool'
Run this and it will setup the trunk parameters correctly
There are some caveats
check the help file first
you will need a DSP resource and some test numbers

Share what you know - Learn what you don't

 

[CharlesBr]

The test returned RED on all the lines, that's a start!

Thanks!