Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog ISM to Class ISM

Status
Not open for further replies.

PBlaney

Technical User
Apr 23, 2007
58
US
I have and Option 81C Release 3.0 with 1000 ISM for Analog stations with 400 of them unused. I would like to convert 500 of the 1000 analog ISM's to Class ISM's. When I have the keycode loaded what happens to the 100 analog station I have program that are now using Class ISM's?
 
do you have the keycode? Were you sold something for 3.0?

Mato' Was'aka
 
I thought 3.0 was no loner supported and you couldn't get ISM changes anymore

Thanks,

Buddy
 
Nortel release a bulletin in the spring of 2009 maybe summer that allow simple ISM upgrade for release 3.0 and up. You may want to check, but I believe that offer has since expired.

@ PBLaney - You loose the analog since you won't have license for them and if you're lucky, unlike me, I didn't remove the analog first...when I did this, the analog tn were in the pbx, but I couldn't delete them.
 
if you were to get the keycodes and load them 100 of your analog station would disapear in no particular order.

Best to remove the 100 you don't want before the ISM upgrade.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top