Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog HOTLINE ringing on 4K

Status
Not open for further replies.

favtech1

IS-IT--Management
Feb 26, 2013
15
US
Is it possible to change the obnoxious continuous ring on a ringdown phone to the normal interrupted ringing?
Hotline phones are ringing continuously when user goes off hook, drives receiving user crazy if they can't answer immediately.
Thx.
 
As far as I know - I have never needed to change it.
The ringtypes are setup in ZAND
DIS-ZAND:RNGTYPE;

Then you can change it one at at time to see if it is better.
Possibly the ringtype you refer to is PRI

CHANGE-ZAND:TYPE=RNGTYPE,PRI=DBLR1;
 
Don't want to change sys ringing, just ringing on particular analog hotline extension, ex., 6xxxx.
 
If you DIS-ZAND:RNGTYPE;
You will see what each one has at present.

Then you can change the most likely one (PRI)
If you do not like it then change it back.

Failing that then move the hotlines to the operator.
A hotline phone needs to be answered
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top