Analog Display phone Avaya

[bigtee959]

Hello All,

Has anyone every seen/used an analog display phone for the G3. I would like to upgrade some of the stations and give some people display without upgrade to a digital port & phone.

Thanks

 

[GroundRatt]

you will need a TN793 circut pack

Steve
Senior Telecom Systems Specialist
University of Texas Health Center at Tyler

 

[nohuhu]

bigtee959,

... or tn2793b circuit pack if you're outside of us. and analog phone with caller id functionality as well.

 

[jgideon]

and then I think you change the set type from 2500 to callerid, right?

 

[mikeydidit]

You are correct jgideon. The pack must be a TN793B to support the caller-Id feature. Also look and make sure that the vintage is V6 or better as the earlier packs had problems. For the original question, I really don't know of any descent phones for this. I have a couple of the Panasonics out there and they still have trouble from time to time.

Happy Holidays to all.

Mike Jones
LSUHSC

 

[bigtee959]

Thank You All,

Mike That was my next question. I have seen a LP550 line powered analog display phone, from Telematrix I think, but for 120 bucks I could give the users a digital phone. Has anyone seen a solution for under $60. If not no early xmas present for them.

Thanks Again


Terence Phillips
Telecommunications Specialist
Fisher-Price

 

[defman1]

Also dont forget to put the proticol type on the system-parameters features page -1.

Protocol for Caller ID Analog Terminals :- Bellcore

It works for me on Bellcore protocol.

Regards,
Defman