Analog disconnect tone?

[ktripp]

Today when someone calls an analog line from external and the external person disconnects, the analog line just dies/disconnects. Is there a way that the internal analog line can provide a feedback tone or something to indicate that the external person has disconnected?

We're using some analog lines for our internal engineers and they have it hooked up to a media gateway. But when someone externally hangs up, there is no way for the media gateway to know that the line has been disconnected.

Thanks,

Ken

 

[4merAvaya]

Check your Disconnect Supervion settings.

Kevin

Group Type: co Trunk Type: loop-start

TRUNK PARAMETERS

Outgoing Dial Type: tone Cut-Through? n
Trunk Termination: rc Disconnect Timing(msec): 500

Auto Guard? n Call Still Held? n Sig Bit Inversion: none
Analog Loss Group: 6 Digital Loss Group: 11
Trunk Gain: high

Disconnect Supervision - Out? n
Answer Supervision Timeout: 10 Receive Answer Supervision? n
Administer Timers? y

 

[ktripp]

This is with an external PRI and internal analog lines. The internal analog lines just drop when disconnected from an inbound.