Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog Card

Status
Not open for further replies.

ciware

Technical User
Jul 18, 2002
31
US
Hello,

We have an Option 11 switch with 2 16 port analog cards. Since we are now down to 1 analog port left, I have installed another 16 port card (in slot 17).

In LD 10, I do an LUVU, and it still only shows my one free analog TN. I have plenty of TN's left on the system, but the card is not showing up. Does anyone know what I need to do?

Thank you all in advance!
 
GO AHEAD AND BUILD A 500 ON 17-0 THEN THE REST SHOULD SHOW UP, ALSO YOU CAN GO TO LD 10 DO A NEW TYPE WILL BE CARD THEN THEY SHOULD SHOW UP ALSO

OLD ROLMEN WORKING ON NORTELS
 
Thank you! As soon as I built the new 500, my LUVU showed 16 new 500 TN's.

A quick one here... I have set up my 500's, but I need them to roll to voice mail upon busy/no answer. Do you know how to make this work on a 500 port?

Thank you again!
 
for forward no answer

LD10
req=CHG
type=500
TN= xxxx
echg=yes
item cls = FNA
item FTR FDN xxxx ( mail DN )

to forward on busy
LD10
req=CHG
type=500
TN= xxxx
echg=yes
item HUNT = xxxx ( mail DN )
item CLS HTA

CR back to REQ




Colin
 
You guys rock! Thanks for all of your help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top