Feb 19, 2013 #1 ronshaw Technical User Apr 18, 2012 16 US the steps to program alalog line into a meriadian opt 11 switch, I know that you have to go into ld 11 what are the next steps
the steps to program alalog line into a meriadian opt 11 switch, I know that you have to go into ld 11 what are the next steps
Feb 19, 2013 #2 GHTROUT IS-IT--Management Nov 25, 2005 7,915 US Analog lines are programed in LD 10 The first step is to log in, then print out a known good/working analog phone. The next step is to go to LD 10, then at REQ, enter "NEW". At every prompt, you compare it to a known working telephone, or look it up in these books: [URL unfurl="true"]http://www.ghtrout.com/micromerl/index.html[/url] ~~ Gene at GHTROUT.com Upvote 0 Downvote
Analog lines are programed in LD 10 The first step is to log in, then print out a known good/working analog phone. The next step is to go to LD 10, then at REQ, enter "NEW". At every prompt, you compare it to a known working telephone, or look it up in these books: [URL unfurl="true"]http://www.ghtrout.com/micromerl/index.html[/url] ~~ Gene at GHTROUT.com