AML Error on 81C

[pakya123]

Hi,
We are using an option 81C , Succession 4.0 with SCCS and Call Pilot.
Following are the errors i get frequently related to AML.
They are quite annoying at times.
I would like to know the impact and also how to get rid of them.

Thanks,

 

[pakya123]

Sorry guys,
Just clicked the Submit post button without attaching the errors.

Here are the errors:

ERR5234 AML:16 PRIO: 3

ERR5234 AML:16 PRIO: 3

CSA102 I 20 9 58 SYS:0 CPI:0 ADM:0

CSA100 O 20 10 4 AML:16 S:16 AML:17 S:0

CSA102 O 20 10 4 AML:16 S:0 AML:17 S:0

 

[johnpoole]

when you get the errors does your cp stay up.. looks like a elan problem, maybe check that to make sure your elan does not have any broadcast traffic. does it happen on both cores? if so might be the nic card in the cp

john poole
bellsouth business
columbia,sc

 

[yyrkroon]

You're getting those because you don't have enough Call Registers reserved for AUX processing...i.e. ELAN.

Look at your CSQI and CSQO prompt, LD 22 PARM. Those should be set at 20% of NCR and NCR should be engineered out properly...refer to the Planning and Engineering NTP for the proper NCR entry

 

[pakya123]

My CSQI & CSQO are both set to 20. I guess i need to increase them to alteast 100 and see if the errors still continue.

Thanks for ur inputs, John & yyrKroon.