Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AML 0 Maintenance notification

Status
Not open for further replies.

dogg1

Technical User
Nov 3, 2008
217
US
Hi All,

I have a question:

We recently had one of our PBX's INI. Now I get this maintenance message, DA AML :: Info :: AML: 0 MAINT INDICATION TIME, that comes up. I checked AML 0 and it use to be used for the old vm system. See below for the print out.

ld 48
LNK000
.stat aml 0
AML: 00 MSDL: 06 PORT: 03 DES: KEYVM
LYR2: W_EST AUTO: ON LYR7: DOWN DSB

.stat aml
AML: 00 MSDL: 06 PORT: 03 DES: KEYVM
LYR2: W_EST AUTO: ON LYR7: DOWN DSBL
.stat msdl 6
GROUP
GROUP 0 MSDL 6: ENBL
DCH 221 OPER PORT 0
DCH 2 OPER PORT 1
DCH 28 OPER PORT 2
AML 0 OPER PORT 3

I'm guessing this use to be disabled and once the INI occurred it re-enabled the port on MSDL 6. My question is how to I get rid of the AML 0 maint. message? Do I need to disable the associated msdl port? How do you disable a aml connection on the msdl?

Any help would be much appreciated.



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top