Running W98se on a pc100 system board with Intel Celeron 433 processor & 24mb ram.
Wanted to upgrade the ram(said would only take pc100 speed, or 66)
But it was suggested to me to try out 256(2x128)mb of pc133 ram.
Its in, and everything is a heck of a lot better than with the 24mb ram.
The only thing is...I keep coming across memory low, out of memory (and mmsystem007 error mssgs)
On boot up, I am told ive got 262mb nvram.
Performance tab says 248.00
Yoav Zobels 'system analyser 2000' says:
Mem Load: 27%
Physical memory: 247.5mb
Available memory: 146.01mb(58%)
Used memory: 101.48mb(41%)
I hope someone motices that things just dont quite add up here.
the only other memory on the system board is nearly 8mb of video ram.
Id ask for the location of a decent memory manger, but they seem to be adding up wrong...
Any ideas?
Wanted to upgrade the ram(said would only take pc100 speed, or 66)
But it was suggested to me to try out 256(2x128)mb of pc133 ram.
Its in, and everything is a heck of a lot better than with the 24mb ram.
The only thing is...I keep coming across memory low, out of memory (and mmsystem007 error mssgs)
On boot up, I am told ive got 262mb nvram.
Performance tab says 248.00
Yoav Zobels 'system analyser 2000' says:
Mem Load: 27%
Physical memory: 247.5mb
Available memory: 146.01mb(58%)
Used memory: 101.48mb(41%)
I hope someone motices that things just dont quite add up here.
the only other memory on the system board is nearly 8mb of video ram.
Id ask for the location of a decent memory manger, but they seem to be adding up wrong...
Any ideas?