Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Always Verifying
- Thread starter dplotts
- Start date
On many adapters if the verify keeps repeating, likely one of the drives is defunct but the controller is not marking it as failed. Look for errors on both drives, pick the most likely, replace it with a new drive, not a re-calibrated or re-certified drive. If this does not clear up the issue, replace the remaining old drive with the first old drive removed.
........................................
Chernobyl disaster..a must see pictorial
........................................
Chernobyl disaster..a must see pictorial
- Status
Similar threads
