Alternative for call discrimination 1

[summerdike]

Is there an alternative way to grant access to outside numbers for extensions without using the call discrimination list and/or abbreviated dialling.

Something like a black list stating non-granted numbers or white list for the allowed numbers to be dialled.

With call discrimination all numbers in a range have to be spelled out in detail when you want just one number to be accessed. I want to bypass this work.


______________________________
"Reload and Restart Requested
System Initiated"

 

[patcher]

There is no way to bypass CD. All numbers you will dial in the system should be listed in CD. But you can barred a certain number in LCR table. Example you can black listed an external number 92708899 and reroute the call to an invalid number.
LCDDI:TAB=ENT,ENTRY=92708899,PRE=9898,TRC=8; Anyone who dials 92708899 will go to 9898. 9898 can be unassign extension series or you can use operator number instead. But no way to bypass call descrimination.

 

[summerdike]

Ok Thanks.


______________________________
"Reload and Restart Requested
System Initiated"

 

[mundus]

Another way is to use the LCR DNT1 or DNT2 where the TOOL parameter can block calls.

 

[lalrl]

you mean toll, but I never saw toll in action. Has no sense.

 

[mundus]

Sorry, yes it's toll and this is working, except from extension with traf=xx1515xx.

 

[whosrdaddy]

mundus,

can you explain a bit more in detail about this method?

--------------------------------------
What You See Is What You Get

 

[mundus]

I try, outgoing dest is 0 and this is LC in NANSI:
LCDDI:TAB=DNT1 or 2,ENTRY=012345678,TOLL=000000000000000 etc.
all extension are blockked to call 0-12345678 except extension with TRAF=xx1515xx( tcd 15 ). TOLL:d1=tcd 14, d2=tcd 13 .. d15= tcd 0, where 0 is not allowed to call and 1 is allowed.

 

[whosrdaddy]

very interesting indeed, I think this is a nice alternative for NACDS...

--------------------------------------
What You See Is What You Get

 

[singhbrindisi]

Hi,

TOLL is used for recording billing info & should not be ignored...In case you Keep TOLL=000000000000000 ,calls will not appear on your Billing system...

Cheers

""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""

 

[whosrdaddy]

from alex :

TOLL parameter

25.2 FUNCTION
The parameter states which TCD category values between 0 and 14 for the users that will deny/allow the completion of the call. TCD category 15 is by default allowed to complete the call.

don't see what this has to to with call logging??

--------------------------------------
What You See Is What You Get

 

[singhbrindisi]

Hi,

Once you have LC enabled, Put the billing system on line & see the diffrence keeping
TOLL=000000000000000 & Toll=11111111111111..

Cheers,

""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""

 

[summerdike]

Thanks Patcher and Mundus.

Made solution like this:

In dnt1 I put exceptions. (granted numbers with toll is all 1's)

In dnt2 I put the numbers that may not be dialled by setting parameter toll to all zeroes.

Works great!

Singhbrindisi:

In the call logging system the calls that were forbidden (toll=0) do not appear. But I am only intersted in reporting the calls that succeeded and have to be payed for.





______________________________
"Reload and Restart Requested
System Initiated"