Alter or Change DN/Caller ID Name intern call

[minicompbx]

Hello guys,

I am trying to setup a new phone for our office.
I have 1140 set with several extensions. key 0 1234 key 1 4567 key 2 8901

Therefore, when when I can call someone internally, I do not want show each of my extension instead of I want to show my only one extension which 1234.
I created a net_data in ld 15 :

http://www.tek-tips.com/faqs.cfm?fid=6890

It does work, for external call but it does not work when it is an internal call.

Any tips

Thank's




Learning is not enough, you have to apply it...

 

[Tman45]

Okay can you print your phone build? Pretty sure you are missing a CLS like DNDA, CNDA - I am 95% sure net_data was only for external CLID. Your reference link is the ability to send Internal employee name out on the external CLID. (basically if you had DID of 123-444-5555 you can send the name of the 1234 extension) - I think is how that reads.
The feature introduces the ability to send either the internal CPND private name or a Public group name for external E.164 calls

 

[minicompbx]

Below my tn info:
REQ: prt
TYPE: tn
TYPE TNB
TN 100 0 2 8
DATE
PAGE
DES

DES AB123
TN 100 0 02 08 VIRTUAL
TYPE 1140
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
CFG_ZONE 00001
CUR_ZONE 00001
MRT
ERL 1
ECL 0
FDN 7000
TGAR 1
LDN NO
NCOS 6
SGRP 0
RNPG 111
SCI 0
SSU 0000
LNRS 32
XLST 0
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA CRPA
MWA LMPN RMMD AAD IMD XHD IRA NIA OLA VCE DRG1
POD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTA CLBD AUTD
GPUD DPUA DNDA CFXA ARHD FITA CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID RNGB AGRD MOAD
AHA DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
VOLD VOUA CDMR PRED RECA MCDD T87D SBMD KEM3 MSNV FRA PKCH MUTA MWTD DVLD CROA CROA
CPND_LANG ROM
RCO 1
HUNT 7000
LHK 2
LPK 3
PLEV 02
PUID
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG FRE
DNDR 0
KEY 00 SCR 1234 0 MARP
CPND
NAME MY, NAME
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 5678 0 MARP
CPND
NAME MY, NAME
XPLN 27
DISPLAY_FMT FIRST,LAST
02 SCR 9101 44 MARP
CPND
NAME MY, NAME
XPLN 27
DISPLAY_FMT FIRST,LAST
03 SCC 0088
04 HOT D 11 95141234567
05 MSB
06 CH D 11 95141234567
07 HOT D 4 7000
08
09
10
11
12
13
14
15
16 MWK 7000
17 TRN
18 AO6
19 CFW 13 7000
20 RGA
21 PRK
22 RNP
23 SSU 0000
24
25
26
27
28
29
30
31
DATE 29 JAN 2014

I did change the DNDA and CNDA but the same result

Learning is not enough, you have to apply it...

 

[GHTROUT]

If this is absolutely critical, then here is what to do:

Let's say your name is Joe Smith and your main extension is 1234.

[ul]
[li]In CPND, enter the name on all of your extensions as "1234 - JOE SMITH"[/li]
[li]Now set CLS CLBA (in other words, the opposite of CLBD)[/li]
[li]Call someone. Your DN appears a XXXX (really, all Xs) and your name display to the other party is "1234 - JOE SMITH"[/li]
[/ul]

Done


~~
Gene at GHTROUT.com

 

[GHTROUT]

Ooops, mis-post. I meant to say CLS DDGD - that is the one that will hide your DN. "DDGD = DN display on other set Denied"

So you want DDGD, CLBD, CNDA, DNDD, NAMA

[ul]
[li]In CPND, enter the name on all of your extensions as "1234 - JOE SMITH"[/li]
[li]Now set CLS DDGD[/li]
[li]Call someone. Your DN appears a XXXX (really, all Xs) and your name display to the other party is "1234 - JOE SMITH"[/li]
[/ul]

~~
Gene at GHTROUT.com

 

[minicompbx]

Hello @GHTROUT

Thank you for the tips.

Now, it show's ---- 1234 MY, NAME instead of what I wanted: 1234, MY, NAME. Therefore, it is possible to remove ---- before the CPND.

Thank you

Learning is not enough, you have to apply it...

 

[GHTROUT]

I'd just keep experimenting with the format - you will get it.

The ---- is the space where the DN was and it will always be there

~~
Gene at GHTROUT.com