stnkyminky
Programmer
After pressing Alt + F11 nothing happens. When I goto Tools -> Macro -> VB editor....nothing happens. All other office 2000 products respond correctly.
Scott
Programmer Analyst
Scott
Programmer Analyst
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ALT F11 doesnt work
- Thread starter stnkyminky
- Start date
- Status
Hi Scott
You should be able to simply reassign the shortcut. Open Word, right-click over the toolbar area and select customise. When the dialog box appears click on the "Keyboard.." button at the bottom. Then select the "All Commands" heading from the "Categories" listbox, and then the "ViewVBCode" heading from the "Commands" listbox. When this is highlighted press "Alt + F11" in the box below. Make sure that the changes are being saved in "Normal" or similar global template and then press assign. This will reset it for you. (Presume you will have to do the same in Excel if needs be)
Hope this helps
Asjeff
You should be able to simply reassign the shortcut. Open Word, right-click over the toolbar area and select customise. When the dialog box appears click on the "Keyboard.." button at the bottom. Then select the "All Commands" heading from the "Categories" listbox, and then the "ViewVBCode" heading from the "Commands" listbox. When this is highlighted press "Alt + F11" in the box below. Make sure that the changes are being saved in "Normal" or similar global template and then press assign. This will reset it for you. (Presume you will have to do the same in Excel if needs be)
Hope this helps
Asjeff
- Status
Similar threads
- Locked
- Solved
- Locked
- Question
- Locked
- Question
- Locked
- Question