Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

alohaspy

Status
Not open for further replies.

RETAMRAP

Technical User
Mar 19, 2008
4
US
we have 2 locations, both running aloha table service.
at location one we are running 6.2.14
at location two we are running 6.4.25
we used the alohaspy setup provided by megabytecoffee on both systems.
location one works great, location two we get no data...
any suggestions?

cheers
e

 
Could you downgrade the site with the higher version to see if that helps?
 
The setup utility does the same type of configuration as documented in my AlohaSpy document. Go through the steps in the document to verify each step was completed. The setup utility only configures terminals 1 through maybe 4 for AlohaSpy functionality, so this could also be the issue if your locations are not configured too closely to each other. In that case, you will have to modify the AlohaSpy.ini if this is not the same terminals you want. -Info is in the document.

The setup utility configures the AlohaSpy to run as a service using the local system account. It has been tested with Windows 2000 and Windows XP Pro only.


MegabyteCoffee.com
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Sponsor

Back
Top