aloha 1

[krazeeddie]

anyone know how I would change caedc setup info?
cust is changing to heartland direct driver

 

[AlohaRoss]

Heartland uses Visanet.
Plug in the information provided on the var sheet.
For the part regarding the url, you add that to the edc.ini file.

-For Aloha 5.3, version 5.3.1 through 5.3.26 should process to Exchange using dial up only. Merchants wanting to
process using IP should use version 5.3.27 or higher because of issues found with earlier versions of Aloha’s IP
functionality which were fixed beginning with version 5.3.27.
-For versions 6.3 or lower on Exchange, if above parameter sheet Ip address is
IPHost=httpsprod.secureexchange.net, then you must add the following line to the edc.ini USEHTTPS=1 for high
speed processing to work.
-For versions 6.3 or higher or 7.0 or higher on Exchange if above parameter sheet Ip address is
IPHost=sslprod.secureexchange.net then you must make sure that the edc.ini does NOT have usehttps=1 and
you must add IPport=22342 to the edc.ini

This is what I add

;Heartland
IPHost=sslprod.secureexchange.net
IPport=22342
WaitForSSLResponseMessageTimeout=75
SSL_RETRY=3

or

;heartland
IPHost=httpsprod.secureexchange.net
IPport=22342
USEHTTPS=1
WaitForSSLResponseMessageTimeout=75
SSL_RETRY=3

AlohaRoss

http://www.needaholahelp.com

An Aloha POS 3rd Party support Solution company.

 

[krazeeddie]

thank you, that should help