ALOHA POS Keeps rebooting unless booted first 1

[joeyp1961]

We are running an old version of Aloha ver. 4.252 with older hardware under windows 95. We are down to two working terminals as we have been using the third one we had for parts. My question regards a recent motherboard failure. We swaped the board but now this terminal will only boot if it is booted first and allowed to be the master terminal. You must shut off the other terminal so it does not boot first. Does anyone know how to fix this problem? Thanks, Joe

 

[DTSMAN]

In the Aloha.ini file you can set the following parameters:
mastercapable=false
servercapable=false

Bo

Remember,
If the women don't find you handsome,
they should at least find you handy.
(Red Green)

http://www.redgreen.com