I have a Mics 7.1 xc that seems to be working fine but is getting ALM 75. And Evt 327-00 in network alarms , it has an AT&T t1 circuit optioned as ESF AMI, clock source set to primary ,CSU stats for 15 min increments come back clean over an hour long period , is this a clocking issue? Was going to try new DTI card first and if not the 6 port combo card. Any suggestions
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ALM 75 and Evt 327-00
- Thread starter jgreen17
- Start date
curlycord
Programmer
In most cases this is a carrier issue.
If you have shaken them up to fix it then yes that's a good start with hardware.
327
Short term alarm threshold has been surpassed in the
DTI cartridge for the detection of Controlled Slip
Overflow.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
If you have shaken them up to fix it then yes that's a good start with hardware.
327
Short term alarm threshold has been surpassed in the
DTI cartridge for the detection of Controlled Slip
Overflow.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
- Status
Similar threads
- Locked
- Question