ALLOWING SPN 2

[sienz]

Thank you for the answer (Reusser) I am able to delete that number. I have another problem:
After I delete that number it come up that DENY 2 and SDRR DENY CODES = 1
Is any body know what does it mean and how can I print the deny number/code that is restristed in that NPA ?

REQ prt
CUST 0
FEAT net
TRAN
ac1
TYPE npa
NPA 214
NPA 214
RLI 0
DENY 2
SDRR DENY CODES = 1
ITEI NONE

 

[janaya]

LD 90

REQ: CHG
CUST: 0
FEAT: NET
TRAN: AC1
TYPE: NPA

NPA 214
FLEN (ENTER THROUGH THIS)
RLI (ENTER THROUGH THIS)
SDRR XDENY
DENY X2
DENY (ENTER THROUGH THIS)
SDRR (ENTER THROUGH THIS)
ITEI (ENTER THROUH THIS)

NPA (ENTER THROUGH THIS)

MEM AVAIL: (U/P): 2357767 USED U P: 2554781 379483 TOT: 5292031
DISK SPACE NEEDED: 610 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
REQ:

Print it out and it should all be gone....

Or..you can just out it and rebuild it...takes about 10 seconds.

hope this helps..if not drop me a note

john.anaya@broadwing.com