Allow ICMP to internal host

[MRLee77]

I hope someone can point me in the right direction,

Heres the scenario, I have a point to point vpn tunnel between 2 sites, I need to allow ICMP traffic from the Site 2 into Site 1. I have tried;

static (inside,outside) xxx.xxx.xSI.TE1 xxx.xxx.xSI.TE2 netmask 255.255.255.255

access-list 100 permit tcp any host xxx.xxx.xSI.TE2 22
access-group 100 in interface outside

But it doesnt work, any info would be much appreciated.

Thanks in advanced

 

[rudeboy]

It would be more helpful if you could post both configs.

 

[pelirroja]

conf t
icmp permit 0 0 outside
icmp permit 0 0 inside

or replace 0 0 with specific ip/host netmask

icmp ? will show the usage if you want to use specific icmp types