All in one Firestop Product

[Kwick18]

Has anyone come across a self-sealing firestop product out there? I use metal sleeves on most penetrations. My problem is that I return to the same pathways often and other trades come thru and use my sleeves past there recommended fill. I found an EZ Path that has no % fill to worry about but it is a lil expensive.

http://www.stifirestop.com/ezpath/index.html

What do most of you use?

 

[Jtodd]

I've been looking into the Ezpath. Looks very interesting. Haven't actually used one yet. I just use the old fashion fire putty. 3M usually.



Justin T. Clausen
Physical Layer Implementation
California State University, Monterey Bay

 

[Servamatic]

If re-entry is an issue, you should use a putty instead of caulk.
With putty it doesn't set up so you can remove it and put it back in place, you do however have to consider fill ratios.

Richard S. Anderson, RCDD

http://www.servamatic.net

 

[Kwick18]

I always use putty. The problem I have is other people using my sleeves and filling up past the fill ratio. I wanted to know if anyone uses any other all in one or do all just sleeve and putty?

 

[tipopen]

I saw this at our BISCI regional meeting. Perhaps this would fit your needs.

http://www.hilti.com/holcom/modules/prcat/prca_navigation.jsp?OID=-9330

 

[Servamatic]

Can I get some gravy with those BISCI?

Richard S. Anderson, RCDD

http://www.servamatic.net