Aligning fields on report

[lgmin]

I am using Crystal 11. I am having difficulty aligning my fields. There are 6 fields that align properly horizontally, and then there is one that will only align slightly above or below it.

I tried adding guidelines, but it only allows me to add guidelines above or below the other fields too.

Is there a trick to get these to line up?

Thanks.

lgmin

 

[Durango122]

hi
check the file report option and see if you have snap to grit check
remove it if you have it check

Durango122

 

[lgmin]

That did it!! Thanks alot!! Something so small and irritating can really be frustrating at times. Thanks again.

lgmin

 

[Durango122]

your welcome
cheers


Durango122