Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Algo 8301

Status
Not open for further replies.

tball1

Technical User
Apr 4, 2010
238
US
Have ip office setup for sip ext paging to algo 8301 trying to get the ip office to dial sip ext then pause and then insert the page zone 1,2, and all call with out end user dialing the hole string tried using comas but did not work that way. Any suggestions. thanks
 
the customer had previous setup with simplex paging with user right button programming to dial short code action: dial action data : 54#14 for office area 54#12 plant and 54#10 for all page. trying to get it to work with the algo 8310 dialing the short code ext dial number: 4417 can not get it to take work with comma to wait after connection tone then insert or dial in this case zone 1,2, or zero for all page.If this makes sense to any one
 
try this
SC = *99xx ( xx= zone number )
TN=4417YN ( Y= wait for call progress, N = xx send as DTMF )
or
TN=4417DN ( D= wait for connect, N=xx send as DTMF )
 
Thanks for the information, I am some what new to ip office so the sc= short code tn- telephone number what would the feature be dial or dial ext? line group 0
 
try Dial first, linegroup id is always 0 for system features
 
thanks ever one for your help on this matter got it to work with *990 dial ext 4417d,0
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top