Guest_imported
New member
- Jan 1, 1970
- 0
Anyone know how to set up this dsl external modem for use on a hp laptop through qwest dsl service. I have an intel internal modem on the desktop that works fine, but the alcatel wont connect.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Alcatel usb speed touch modem and qwest
- Thread starter Guest_imported
- Start date
- Status
MWM
MIS
- Aug 9, 2001
- 200
Verify the PVC vpi/vci numbers of your service and those that are in the Alcatel or other hub. These numbers must match, at the ISP "stack" or ATM hardware and at your end.
Be advised you may have to get level two tech support to get this answered. Also, you may have to call the tech support numbers for the Alcatel. Different models of their hubs/routers may be burned with different numbers.
Common numbers are 0/35 or 8/35, but less expensive equipment has them burned in and they are provided to customers for whom there is a match.
It is possible, though, to have them change the vpi/vci settings if you can get to that level of tech support.
Best
Mike
Be advised you may have to get level two tech support to get this answered. Also, you may have to call the tech support numbers for the Alcatel. Different models of their hubs/routers may be burned with different numbers.
Common numbers are 0/35 or 8/35, but less expensive equipment has them burned in and they are provided to customers for whom there is a match.
It is possible, though, to have them change the vpi/vci settings if you can get to that level of tech support.
Best
Mike
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question