Alarms

[casp1616]

Hi, everybody
I need help for this issue, I have some alarms, that I don´t know how to interpret, but my telephony system goes down and some phones run out of tone for a while, then the phones have tone again.

These are the alarms: CODE 283, CODE 100 AND CODE 38


<ALLOP:CODE=283;
ALARM LOG
IDENTITY: UNEFMRECTORADO
VERSION: CXP1010101/4/TSWSP02/R3A

DATE: ******* TIME: 01:08:22
CLASS: 0
283 CONGESTION VALUE FOR KR REACHED
DATE TIME ALP NOIF UNIT EQU INF1 INF2 INF3
******* 00:15:00 16 1 TRP 001-*-**-** 121 597 40
RDATE RTIME
******* 00:45:00

ALREI NOT DONE!

END
<ALLOP:CODE=100;
ALARM LOG
IDENTITY: UNEFMRECTORADO
VERSION: CXP1010101/4/TSWSP02/R3A

DATE: ******* TIME: 01:08:31
CLASS: 4
100 INTERNAL ERROR ON DSU BOARD
DATE TIME ALP NOIF EQU INF1 INF2
******* 00:00:29 2 1 001-0-**-** 2 259


ALREI NOT DONE!

END
<ALLOP:CODE=38;
ALARM LOG
IDENTITY: UNEFMRECTORADO
VERSION: CXP1010101/4/TSWSP02/R3A

DATE: ******* TIME: 01:08:38
CLASS: 1
38 DISTURB. COUNTER INCREASED DUE TO FAULTY PROGRAM EXECUTION
DATE TIME ALP NOIF EQU INF1
******* 00:08:06 10 1 001-0-**-** 0


ALREI NOT DONE!

END
<

If anyone could tell me, what it means, it would be helpful to me.

Thanks and greetings.

 

[parnum]

You have alarm code 100

You must have no traffic during this time:

LSBLI:LIM=1,DSU=2;
LSFTI:LIM=1;
LSBLE:LIM=1,DSU=2;

If print shows faulty, DUSYI; then single button LPU, swap DSU, single button LPU out again and wait for system to reload from backup. If no change swap LSU in Mag 2.

Looks like you have a faulty DSU, or the LSU in mag 2 (or the cable)

best parnum

 

[casp1616]

parnum:
this is the prinout:
How can I interpret this?

<LSBLI:LIM=1,DSU=2;
LSBLI:LIM=1,DSU=2;
SURE? (YES/NO)
<YES
EXECUTED
DSU BOARD IS NOW BLOCKED BUT THERE MAY BE EXISTING TRAFFIC
<LSFTI=LIM=1;
SYNTAX ERROR
<LSFTI:LIM=1;
LSFTI:LIM=1;
SURE? (YES/NO)
<YES
ORDERED
<LSBLE:LIM=1,DSU=2;
EXECUTED

SPONTANEOUS PRINTOUT

LIM SWITCH FUNCTION TEST RESULT FOR LIMNO 1
LSU CM : OK
AM : NO TEST PERFORMED
PROM : OK
RAM : NO TEST PERFORMED
CLOCK : OK
HDLC : NO TEST PERFORMED
PCM-FREE : OK
PCM-BUSY : NO TEST PERFORMED
BOARD PROM RAM FEEDBACK DB-ADDR P/U-SIGN FREQ
DSU 0 OK OK OK OK OK OK
DSU 1 OK OK OK OK OK OK
DSU 2 NO CONTACT
DSU 3 NO CONTACT

END
<

and another thing? what is DSU?, sorry but I don´t know any of this. Thanks and greetings

 

[doktor]

The LSU is the main switch in MD110 and MX-ONE. The DSU is the swich in each cabinet - helper switch.
After your printouts it should work now, or ?

///doktor

http://www.kandu.dk/spg153996.aspx