alarms DTM332 &AMH004

[ostry22]

I received this alarmTM332 70
Alarm description: Digital Trunk Maintanance (LD75)
Response: A level 3 to level 2 signaling test has failed for DTSL/DDSL
I don't know what to do, when I enable a loop 70 (enl ddcs) and DCH (enl ddsl 70)after few minutes it are down again.
I got also alarm AMH004 – maybe it is relationship between them?

Is any master de la hacker who can help me?
Marcin

AMS alarm code: 0500000501
PBX alarm code: AMH004

Orginal alarm: [My_Meridian] AMH004

Alarm description: Auxiliary Message Handler
Response: The SL-1 and the auxiliary processor are out of synchronizat

AMS alarm code: 0500000769
PBX alarm code: DTM332 70

Orginal alarm: [My_Meridian] DTM332 70

Alarm description: Digital Trunk Maintanance (LD75)
Response: A level 3 to level 2 signaling test has failed for DTSL/DDSL

 

[johnpoole]

The SL-1 and the auxiliary processor are out of synchronizat

that will go away using the sync command in ld 135 or 137, been a while.. what does the lcnt table show in ld 60 and the ssck 0 command show.. the ld 73 ref is the ddb threshold params more then likely.. looks like a bad card or just taking hits on the e1, layer 2 to layer 3 would make me look at the interace or rls on that span.. if this was a working ckt, suspect a far end upgrage causing the problem

john poole
bellsouth business
columbia,sc