Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Alarm to Dect

Status
Not open for further replies.

nschreuder

IS-IT--Management
Jun 11, 2004
210
NL

Hi to all,

How do i configure getting alarm 2 or higher on my DECT-extension or cellphone?

Thanx i.a.




**************************************
“Science may never come up with a better
communication system than the coffee break.”

**************************************
 
Hi NCCOI
you create Alarm modem on the NIU board
IOEQI:EQU=X-X-XX-XX,IODEV=ALARMMODEM,USAGE=MML;
IOFDC:IODEV=ALARMMODEM,NDC=dect number or cellphone,CALLS=3,WAIT=30;
ALAPI:IODEV=ALARMMODEM,CLA=2&&4;
to attach external modem on the NIU board and analog extension connect to external modem
best regards
 

Thanks TDAT, but "to attach external modem on the NIU board and analog extension connect to external modem" is not quit clear to me.

You mean: i connect an external modem (no matter type a.s.o.) to the NIU and an analoque extension to the modem?
But how will it work? What's the procedure to get the alarm on my dect/cellphone?

Thanks again.





**************************************
“Science may never come up with a better
communication system than the coffee break.”

**************************************
 

Hi all,

I didn't get it working. What am i doing wrong?

See below fot the details:

ioddp; gives
[tt]
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
LIM4 ALARMMODEM 004-2-60-1 - MML - 7

<ioifp:iodev=alarmmodem;
I/O INTERFACE CHARACTERISTICS
IODEV IFACE BAUDR WORDL PARITY STPBIT PROC
ALARMMODEM V24 ALL 8 NONE 1 ECHO
END

<aldip;
ALARM DISTRIBUTION
DATE: 23OCT07 TIME: 11:50:16
IODEV FUNCTION FORMAT INT/CLA DATE TIME
ALARMMODEM ALARM PRINTOUT ORDINARY 2,3,4

END

<iofdp:iodev=alarmmodem;
I/O FUNCTIONS DEFINITION
IODEV TRD NDC CALLS WAIT DELAY SUPER
ALARMMODEM BOTH 1234 2 30 5 YES
00655667788
END

<iofti:iodev=alarmmodem;
FUNCTION TEST RESULT
TEST NOK
UNSPECIFIED ERROR CODE FOR V.24 TEST
END [/tt]

I use an analogue arx 28800 tf modem and a TSR 902 0240/7000 R1A cable.

Do i forget something or what? Please help.

Thanks in advance.

Greetz,



**************************************
“Science may never come up with a better
communication system than the coffee break.”

**************************************
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top