Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Alarm Set through Voicemail Pro 1

Status
Not open for further replies.

MrAnderson1960

Technical User
Oct 6, 2017
15
JO
Hello ...

I have a client in a school who wants to do programming. By clicking a certain number, he can hear voice from all phones, Emergency and evacuation, for example.
Can achieve this through the voice mail Pro ??

Thanks
 
Dial Paging. Read the VM Pro help file, i believe there is a example or search this forum.
 
Hello ...

Is this will work ?

Untitled_koet68.png
 
MrAnderson1960 said:
Emergency and evacuation, for example.
DONT DO THIS
the Telephone system is not a suitable device for emergency alerts - there are too many way that the user of the handset could disable the function (either deliberately or accidentally), only use paging fro non essential messaging.

A school should have a proper alarm system. Use the correct tool for the correct job!


Do things on the cheap & it will cost you dear
 
when configure the post dial action, It says "Forwarded" and then rings all the phones on the group, when pickup one of the phones hear the message. and the other phones stop ringing.
is there a way to page the wave file over all the speakers phones.

 
Create a shortcode like *99/groupnumber/dial paging/0 then let the Post Dial action dial *99
 
Under the properties of Post dial you have to give PAGE:Main like this if you want to page Main. Or give the group name.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top