Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Alarm Round trip violation etc 1

Status
Not open for further replies.

DocRobotnik

Technical User
Mar 29, 2012
97
CA
Hi,

I get often in my Alarms this kind of event...

information 2018-08-26T15:33:25.634487 BCM450V60 utps [7785]: eventID=50507; message=Round Trip Delay Violation Cleared: 9ms, nearDN: 314, source IP: 192.168.2.30, source port: 51008, destination IP: 174.88.230.71, destination port: 30096, ct 0, eT D, nLR 62, dR 70, bD 138, bL 291710, gD 76, gL 26475, eSD 56, aNL 0, aSP 0, rTT 647; problemResolution=No Action Required.

information 2018-08-26T15:33:30.074559 BCM450V60 utps [7785]: eventID=50507; message=Round Trip Delay Violation Cleared: 10ms, nearDN: 317, source IP: 192.168.0.34, source port: 51010, destination IP: 192.168.0.25, destination port: 30098, ct 0, eT D, nLR 0, dR 0, bD 0, bL 0, gD 0, gL 0, eSD 0, aNL 0, aSP 0, rTT 655; problemResolution=No Action Required.

I don't see any problems physicaly or software, there is no phones laggy quality is very fine, the main switch is a Rosewill 1000Mbps, i never noticed a conjested sign on my network, still always have in lan <10 ms.


what i need to do with this ?
It's annoying to see this on almost all set when they took the handset.

**********************************
* Doc Robotnik
* Network & Hardware Administrator
* Likedin
 
I have always blamed one of my cheap TPlink local switches for the 3 phones on it, others are ok.

Try going into TelephonyMetrics/PVQM and adjust some of the settings there.

Mine are setup as:
Inter 20/40/20/40
Listening 65/0/65/0
PacketLoss 2/7/2/7
RoundTrip 120/120/120/100 <----start with this one

Polling Default at 10

Been awhile since I played with this section but did manage to reduce the alarms.
It's like setting the threshold as when to trigger an alarm.




________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Done ! Thanks ! :)

You are right, the main router is a TP-Link TL-ER604W, but phones technicaly don't need to deal with, the rosewill switch is suppose to do the routing and the DHCP server is a win2k3, the tp-link is supplying the internet only, this is strange ! But i will not be surprise that router is bugging the whole network packets, i had already many problems with that router in past.

**********************************
* Doc Robotnik
* Network & Hardware Administrator
* Likedin
 
Yes as Curly has stated, it is a pain. What I do now is to reduce the events in the Alarm manager section.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top