alarm report

[Davide3107]

Hi
I have in alarm report an alarm on port 01A0117 ETH-PT. Do you Know this alarm? I don't understand it.
Thank You.

D.

 

[mikeydidit]

Look under the error log. (disp err) That will give you the errors that are logged against that ETH-PT (Control Lan Ethernet). Depending on the error and the aux data on that port determines what test you need to run. If you will post the errors here I will give you the test procedures to resolve those alarms.

Mike Jones
LSUHSC

 

[orypecos]

This port indicates that whatever u are using the lan card for is not working. Do "display com links" to see what is using the lan board.