alarm in tda200

[alisamir]

The operation of the red light in tda200 for the alarm and what is the reason why I know how this alert

 

[obtsystems]

Not sure what you need to know. This light will come on for many reasons line power failure to smdr output getting disconnected. Not something to worry about if the system is working ok

 

[bigglesnz11]

Normally on Installs, I put a piece of black tape over the alarm light
Saves a lot of enquiries,
can still check the error log if needed

 

[alisamir]

how can i check the error log if needed from program of tda 200?

 

[obtsystems]

With programming tool under utility you have an error log option
If with out maintenance tool you can program a button as a log key

 

[alisamir]

how can i program a button as a log key

 

[wayne079]

From maintenance console 4.1.4 Flexible Button, drop down the type until you get to system alarm on the extension you require.

From the Handset - Program - Flexible button to be assigned - 58 - Auto dial/Store - Program to exit