shipwright
Technical User
Just a quickie.... Does anyone know what Alarm Code 52 8 2 refers to it's not in the installers guide so i presume it's in the alarm code book.
thanks
RAY
thanks
RAY
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ALARM CODE
- Thread starter shipwright
- Start date
- Status
That alarm code 52 means A trunk card has been disconnected. The book says to identify the module that caused the alarm (in your case it looks like Mod 8). power down the system. Check all connections to the module. Check that the card is properly seated (card 2 in your case). If the problem persists, replace the cables. This is straight out of the Alarm Code book.
- Thread starter
- #3
shipwright
Technical User
Thanks for the quick reply and yes it was the T/C not seated correctly....
- Status
Similar threads
