alarm: 50-4

[nebraska76]

i have had a few alarms lately and i was wondering if there is a manuel or something that lists what every alarm is related to. thank you in advance.

 

[Bitonti]

In programming go to Management User Guide
Do a find on alarm 50 it will tell

Event ID: 50 Message: A Digital Station Computer Module on bus %1 has been disconnected
or powered down.
User action: Power down the system and check all connections to the module. If
the problem persists, replace the module.
Alarm severity: Critical
Trap-type: Error
Logs: MSC event 250, Sev=P9, Cat=C
Comments: MSCid=250, Sev=P9, Cat=C. On system boot-up the BCM waits 3
minutes before reporting alarm 50/51 to give the modules time to boot
up. On a running system the BCM requires a module to be lost for at
least 2 minutes before reporting alarm 50/51

 

[nebraska76]

i am sorry but i did a find on every manual i have including the programming management user guide and did not find anything. any other thoughts maybe? thank you for the help and i will gladly try any other places.

 

[acewarlock]

Select a language from the list.
Select an option from the list.
Technical Documentation (Installation & Administration)
Technical Documentation
System Programming
BCM Management user Guide (BCMMUG.PDF) You may have to wait awhile for it to download as this is a large file.

 

[Bitonti]

DO a find on Alarm 50 not 50-1 or 50-4.
There is a lot of alarms in there just type Alarm if your still having troubles. Some Alarms your even able to google search.

 

[nebraska76]

thank you everyone. i keep looking at each post you put up and i will keep trying each of one i get. thanks again.