Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AIX format ssa disk with raid5 attributes to non raid5 attributes

Status
Not open for further replies.

soco735305

Programmer
Jun 12, 2002
3
US
I just received a refurbished PN18P1126 disk drive and installed it in a risc6000 SSA.

A. Ran the cfgmgr -v
B. pdisk shows up in lscfg with no hdisk association
C. Tried to do a diag ssa format with a msg saying it was
part of a raid5 array.( It must have been used in a raid5
prevous to me receiving it.

How do a remove the raid attribute so I can format it.

Thanks


 
Have a look in diag -> Service Aids -> SSA Service Aids. Ther should be an option to change de disk's usage from raid member to system disk and/or vice-versa.

It's been ages since I've last touched SSA disks...

HTH,

p5wizard
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top