AIX 6.1ISSUE after upgrade from 5.3

[AIXOS61]

DEAR All,

We lately updated the OS and Microcode i:e
OS 5.3 to 6.1
The current permanent system firmware image is SF240_202
The current temporary system firmware image is SF240_358
The system is currently booted from the temporary firmware image.


The server was working fine from last 3 days
today it stated giving error messages ...Kindly help..

the error messages from errpt is as below ...


LABEL: SCSI_ERR3
IDENTIFIER: 5CC986A0

Date/Time: Sat Jun 5 09:50:38 GMT+05:30 2010
Sequence Number: 246
Machine Id: 0000E188D700

Class: H
Type: PERM
WPAR: Global
Resource Name: sisraid0
Resource Class: driver
Resource Type: sisraid
Location: U787F.001.DPM05Y8-P1-C8-T1
VPD:
PCI-X Dual Channel Ultra320 SCSI RAID Adapter:
Part Number.................39J4604
FRU Number..................39J4604
Serial Number...............YL102600907A
Manufacture ID..............0002
EC Level....................0
ROM Level.(alterable).......05110060
Product Specific.(Z0).......1908
Product Specific.(Z1).......2
Brand.......................H0

Description
MICROCODE PROGRAM ERROR

Probable Causes
ADAPTER MICROCODE

Failure Causes
ADAPTER

Recommended Actions
PERFORM PROBLEM DETERMINATION PROCEDURES
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SENSE DATA


Thanks - Regards,
MS

 

[p5wizard]

See if you can find a microcode update for your SCSI adapter. If not, then call it in to IBM. "PERM H" (Permanent Hardware) errors usually mean there's something physically wrong with the adapter. But it may be that the firmware (driver) on the adapter is just incompatible with the hardware on your machine.

HTH,

p5wizard

 

[AIXOS61]

These are current levels of firmware. Are all the levels at the right levels .. kindly suggest ..

sys0!system:SF240_358 (t) SF240_202 (p) SF240_358 (t)
sisscsia0!53495313.0513005a
sisioa0!53495311.05110060
ent0!14108902.DV0210
ent1!14108902.DV0210
cd0!IBM-DROM00205L.P533
rmt0!B007
hdisk0!HUS1030.50505230.52505151
hdisk1!HUS1030.50505230.52505151
pdisk0!HUS1030.50505230.52505152
pdisk1!HUS1030.50505230.52505151
pdisk3!HUS1030.50505230.52505152
pdisk4!HUS1030.50505230.52505151
pdisk5!HUS1030.50505230.52505151
pdisk2!HUS1530.56425030.53343234



Thanks,
MS

 

[p5wizard]

Open a support call with IBM

HTH,

p5wizard

 

[DukeSSD]

Or you might want to try one of the many free IBM update services, for instance:

MDS:

http://www14.software.ibm.com/webapp/set2/mds/fetch?page=mds.html

SUMA:

http://www.ibm.com/developerworks/aix/library/au-updateaix.html