AIX 4.3.3 installer request

[mzaimz]

Hello all,

I need an AIX 4.3.3 Installer to be run on a p520 machine. I have recently tar another Machine which run 4.3.3 but the installation was not completely done as i could not run mksysb on the machine to produce a bootable image of the system.

I am also wondering if i have tar the / on the machine, is it possible to install a linux based power pc OS on the machine and then untar the tarball i made on the existing machine? Please advise.

Thanks

 

[DukeSSD]

I'm pretty sure the min oslevel supported on power 5 (like the p520) is AIX 5.2 ML4 so you have no hope with AIX 4.3 because it is simply way too old to support the newer hardware.