Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AIX 4.3.1.0 startup to run level 2
- Thread starter mcguinne
- Start date
madmurdock
MIS
- Jan 13, 2003
- 105
- 0
- 0
1) Check the /etc/inittab for the
init:x:initdefault line, where x stands for the default runlevel, in most cases 2
2) Look for a line like:
app:2
nce:/etc/rc.app, where 2 is again the runlevel, where this rc-file is started. If you wish to be executed on other runlevels too, you can add it like
app:123456nce:/etc/rc.app
madmurdock
init:x:initdefault line, where x stands for the default runlevel, in most cases 2
2) Look for a line like:
app:2
nce:/etc/rc.app, where 2 is again the runlevel, where this rc-file is started. If you wish to be executed on other runlevels too, you can add it likeapp:123456
nce:/etc/rc.appmadmurdock
- Status
