Aironet 1231 and WPA... Radius Workaround

[mlchris2]

I just got my Aironet 1231 and started the config with the web util.

I noticed I've got to setup a radius server if I want to use EAP or WPA security. Is there a way to bypass this? I had a linksys that did all the WPA db authentication on the device itself... kinda disappointed at the moment.

I can build a Linux Radius server... but not keen on WEP security for the time being.

any help is appriciated.

Mark C.

 

[ADB100]

It should support WPA-PSK (Pre-Shared-Key) which doesn't require a Radius Server:

http://www.cisco.com/en/US/products...s_configuration_example09186a00801c40b6.shtml

HTH

Andy