Airespace config

[ktripp]

We just received our Airespace equipment - 2006 controller and 1000 AP's.
Any advice on setting up /configuring?

Ken

 

[RookThis]

Did you make any head way on this? I just got a 4400 airespace (now Cisco Wireless Lan Controller) and haven't been able to configure it completely yet. I was able to get an ap on it but haven't been able to get the supplicants to get IP addresses once I've associated the the AP. Well good luck... Here is a link on some info that I used or I'm using I should say:

http://www.cisco.com/application/pd...ps6313/c1067/ccmigration_09186a008047b771.pdf

 

[ktripp]

I got the controller working with the AP's.
Having a heck of a time trying to get it to talk to a Cisco ACS server with AD for authentication.
Any suggestions?

Ken

 

[RookThis]

You are further along than I am. I still can't get the PCs to get an IP address. Almost like the problem you denoted originally. How did you get that to work?

 

[ktripp]

Can you see the AP's through the controller?
I assume yes.

Under the wireless lan's, change the L2 security to none.
Then in Switch/Interfaces on each interface point it to the dhcp server.

I have the AP's and controller sitting on my user subnet right now playing with them. This worked fine for me.