Hi everyone!
I a looking everywhere for Windows drivers for the Agilent Tachyon HPFC-5166B Fibre Channel controller.
It seems it is IMPOSSIBLE to locate them, even though on the quickspecs it was stated windows support.
I dropped on an IP4700 Clariion disk array with Longbow motherboards (the Storage Processors) and since complete lack of FLARE, seed drive or Software, I installed Windows 2003 Server on the boards, but it does not have the agilent drivers...so only the small 2.5 inch drive was detected, and used to install the OS.
A little help: the HP HHBA-5121A HBA uses the same chip, but once again, no drivers...
Thanks for all your support
I a looking everywhere for Windows drivers for the Agilent Tachyon HPFC-5166B Fibre Channel controller.
It seems it is IMPOSSIBLE to locate them, even though on the quickspecs it was stated windows support.
I dropped on an IP4700 Clariion disk array with Longbow motherboards (the Storage Processors) and since complete lack of FLARE, seed drive or Software, I installed Windows 2003 Server on the boards, but it does not have the agilent drivers...so only the small 2.5 inch drive was detected, and used to install the OS.
A little help: the HP HHBA-5121A HBA uses the same chip, but once again, no drivers...
Thanks for all your support