Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Agent sync from IP Office - PABXConfigAccess

Status
Not open for further replies.

allannj

IS-IT--Management
Jan 17, 2013
21
DK
Hi IPOCC Gurus,

I get this from the IPO Sync Service:

C0445a 00:37:12.259 TC_General Active field is not set to 1 in DataBase:pABXConfigAccess. Data Import may not be completed. Need to be set for Sync service to start
C0446a 00:37:12.259 TC_Error Active field is set to 2, might need to restart Sync Service.
C0450a 00:37:17.882 TC_General Heartbeat Checking whether system is ready to start heartbeat with IPOffice. Will start once Sync service is successfully connected to IPO initially
C0451a 00:37:22.259 TC_General isDeviceSMA, getactive is 2
C0452a 00:37:22.259 TC_General Active field is not set to 1 in DataBase:pABXConfigAccess. Data Import may not be completed. Need to be set for Sync service to start
C0453a 00:37:22.259 TC_Error Active field is set to 2, might need to restart Sync Service.
C0465a 00:37:32.259 TC_General isDeviceSMA, getactive is 2
C0466a 00:37:32.259 TC_General Active field is not set to 1 in DataBase:pABXConfigAccess. Data Import may not be completed. Need to be set for Sync service to start
C0467a 00:37:32.259 TC_Error Active field is set to 2, might need to restart Sync Service.
C0477a 00:37:42.260 TC_General isDeviceSMA, getactive is 2
C0478a 00:37:42.260 TC_General Active field is not set to 1 in DataBase:pABXConfigAccess. Data Import may not be completed. Need to be set for Sync service to start
C0479a 00:37:42.260 TC_Error Active field is set to 2, might need to restart Sync Service.

What to look for?

Regards, Allan
 
Disable it =)
I don't see the point of syncing users between IPO and IPOCC. but maybe that's just me.

"Trying is the first step to failure..." - Homer
 
Hi Janni78

I see Your point.
But i works now - but how im not excactly sure.
 
The problem is that I still need to configure CLI etc in IPO so syncing them with bad naming between systems doesn't give me anything.

I would see the point if you have a central admin tool where you can adapt setting for both systems and they would sync from that.

"Trying is the first step to failure..." - Homer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top