After specific number block..unblock calls not going to vm

[minnesotajim]

I have been trying to block call from a specific number sucessfully. However, any other call won't go to vm the ring no answer. In the station form I have no cover path assigned. If one is assigned it will go to vm on block and unblocked call. Any ideas on what I am missing?

Number: 1 Name: blocking Background BSR Poll? n
Multimedia? n Attendant Vectoring? n Meet-me Conf? n Lock? n
Basic? y EAS? y G3V4 Enhanced? y ANI/II-Digits? y ASAI Routing? y
Prompting? y LAI? n G3V4 Adv Route? y CINFO? y BSR? y Holidays? y
Variables? y 3.0 Enhanced? y
01 goto step 3 if ani in table 1
02 route-to number 599 with cov y if unconditionally
03 disconnect after announcement none
Extension: 592
Name*: blocking
Vector Number: 1
Attendant Vectoring? n
Meet-me Conferencing? n
Allow VDN Override? n
COR: 1
TN*: 1
Measured: none


VDN of Origin Annc. Extension*:
1st Skill*:
2nd Skill*:
3rd Skill*:



* Follows VDN Override Rules

VECTOR DIRECTORY NUMBER

AUDIX Name:

Return Destination*:
VDN Timed ACW Interval*:

BSR Available Agent Strategy*: 1st-found
BSR Tie Strategy*: system

Observe on Agent Answer? n


Display VDN for Route-To DAC*? n
VDN Override for ISDN Trunk ASAI Messages*? n
Background BSR Polling? n

BSR Local Treatment*? n

Reporting for PC Predictive Calls? n
* Follows VDN Override Rules

VECTOR DIRECTORY NUMBER

VDN VARIABLES*

Var Description Assignment
V1
V2
V3
V4
V5

VDN Time-Zone Offset*: + 00:00
Daylight Savings Rule*: system

* Follows VDN Override
Rules
Voice System name: - - STATION

Extension: 593 Lock Messages? n BCC: 0
Type: 6408D+ Security Code: * TN: 1
Port: 001V312 Coverage Path 1: COR: 1
Name: Coverage Path 2: COS: 1
Hunt-to Station:
STATION OPTIONS
Time of Day Lock Table:
Loss Group: 2 Personalized Ringing Pattern: 1
Data Module? n Message Lamp Ext: 593
Speakerphone: 2-way Mute Button Enabled? y
Display Language: english

Survivable COR: internal Media Complex Ext:
Survivable Trunk Dest? y IP SoftPhone? y
Remote Office Phone? n
IP Video Softphone? n




STATION
FEATURE OPTIONS
LWC Reception: spe Auto Select Any Idle Appearance? n
LWC Activation? y Coverage Msg Retrieval? y
LWC Log External Calls? n Auto Answer: none
CDR Privacy? n Data Restriction? n
Redirect Notification? y Idle Appearance Preference? n
Per Button Ring Control? n Bridged Idle Line Preference? n
Bridged Call Alerting? n Restrict Last Appearance? y
Active Station Ringing: single

H.320 Conversion? n Per Station CPN - Send Calling Number?
Service Link Mode: as-needed
Multimedia Mode: enhanced Audible Message Waiting? n
MWI Served User Type: Display Client Redirection? n
AUDIX Name: Select Last Used Appearance? n
Coverage After Forwarding? s
Automatic Moves: no Multimedia Early Answer? n
Remote Softphone Emergency Calls: as-on-local Direct IP-IP Audio Connections? y
Emergency Location Ext: 593 Always Use? n IP Audio Hairpinning? n
Prime Appearance Preference:

STATION

Voice System name: - INCOMING CALL HANDLING TREATMENT
Service/ Called Called Del Insert Per Call Night
Feature Len Number CPN/BN Serv
public-ntwrk 10 6xxxxxxxx9 10 6xxxxxxxx9

 

[Tolson]

Do you have EC500 enabled on the switch. If so then setup a dummy extension on the switch and have the cell number associated to it. Also set the cor on the station to not allow incoming calls.

This works if you are only trying to block one or two numbers sice each number needs a specific extension to associate with and an EC500 license.

 

[minnesotajim]

The extension is not associated with EC500.