SCO 6.0, After an improper power loss and the hw turned off: on the boot process, everything starts up ok, EXCEPT one filesystem (/d) which seems to fail fsck in boot. After I use the 'SCO filesystem manager' to check and repair the /d filesystem, then it can be successfully mounted. Everything works ok...until the next reboot. Is there a process to permanently fix the /d and insure autommatic mounting during boot process?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
after power loss, /d filesystem does not mount
- Thread starter RebYoel
- Start date
- Status
Similar threads
