hi
I upgraded my machine from ME to XP. I was happily connected to the cable modem through ADMTEK AN983 NIC before the upgrade. After the upgrade, my LAN icon says "Network cable is unplugged". The device seems to be working fine when viewed through the device manager.
I also downloaded the drivers from the manufacturer's site and still no luck. I was reading the thread with a similar problem in presario where the cable pin had to be adjusted. I checked that as well. No luck!! Cable guy came over and said that the maybe the NIC is not compatible. But both microsoft and ADMTek site suggest otherwise.
Please Help!!!
I upgraded my machine from ME to XP. I was happily connected to the cable modem through ADMTEK AN983 NIC before the upgrade. After the upgrade, my LAN icon says "Network cable is unplugged". The device seems to be working fine when viewed through the device manager.
I also downloaded the drivers from the manufacturer's site and still no luck. I was reading the thread with a similar problem in presario where the cable pin had to be adjusted. I checked that as well. No luck!! Cable guy came over and said that the maybe the NIC is not compatible. But both microsoft and ADMTek site suggest otherwise.
Please Help!!!